Bitcon Transformer Doors are designed for security and durability and manufactured from 1.6 mm mild steel.

FRAME

The frames are pressed from 1.6mm steel sheeting or pre-galvanised steel sheeting for coastal conditions fully welded in a double rebated profile.

HINGES

The doors are fitted with l00mm heavy duty flanged stainless steel hinges.

FINISH

The doors are finished with a red oxide primer. Galvanised units are cleaned with degreasing solution and finished with a galvanised primer. Doors are not available in hot-dipped galvanised finish.

IRONMONGERY

Doors are fitted with a pull handle, padlatch and barrel bolts to double doors as a standard or other ironmogery as specified.

INSTALLATION

Doors and frames will be delivered to site as a unit. When installed by the contractor the door and frame unit must be installed square true and plumb with the door/s in the closed position. The bottom leading edge/s or the door/s must be wedged to support the vertical load of the door on the frame. The wedge/s should not be removed until the brickwork is satisfactory cured.

LOUVRE VENTS

Louvre vents lined on the inside with a vermin proof mesh screen size 560mm x 560mm (AV.) can be fitted to the doors or manufactured fully louvred if required.

LOUVRE PANELS

Louvre panels lined on the inside with a vermin proof mesh screen sizes 900mm x 747mm (ALU) and 1590mm x 747mm (BLU) complete with rebated frame surround for installation in walls are also available.

DOOR WEIGHT

21 kg/m2

STANDARD TRANSFORMER DOOR SIZES

815mm x 2030mm Type A With Vent Type AV Fully Louvred AVA
915mm x 2135mm Type B With Vent Type BV Fully Louvred BVA
1220mm x 2135mm Type C With Vent Type CV Fully Louvred CVA
1830mm x 2440mm Type D With Vent Type DV Fully Louvred DVA
1220mm x 2440mm Type F With Vent Type FV Fully Louvred FVA
1830mm x 2135mm Type G With Vent Type GV Fully Louvred GVA
915mm x 2440mm Type H With Vent Type HV Fully Louvred HVA
1525mm x 2135mm Type M With Vent Type MV Fully Louvred MVA
1525mm x 2440mm Type Y With Vent Type YV Fully Louvred YVA
900mm x 747mm Type ALU Four Sided Louvred Vent Four Sided Louvred Vent
1590mm x 747mm Type BLU Four Sided Louvred Vent Four Sided Louvred Vent

TRANSFORMER DOOR SIZES

Whilst every precaution is taken in the preparation of this content, which describes our standard product at the time of going online.
It is not to be considered as binding in details unless confirmed by us. We reserve the right to make any alterations without notice.

Product Range


RUBIDOR® FIRE DOOR

RUBIDOR® FIRE DOOR Class A, B, D & E

Cores are constructed from a magnesium oxychloride monolithic reinforced insulative material with excellent fire resistance and mechanical strength.

SLIDING FIRE DOORS

SLIDING FIRE DOORS Class A, B, D

Are constructed from our insulative material, which is covered on both sides with steel sheeting and a 3mm channel surround screwed on.

LEAD-LINEDDOORS

LEAD-LINED HINGED & SLIDING DOORS

Are designed and manufactured to afford personnel protection from environments where X-ray equipment is used reducing the level of exposure.

SECURITYDOORS

SECURITY DOORS

Consist of the Anti-Bandit, Polar® and Hippo® doors, each designed to fulfill a specific security functions.

TRANSFORMER ROOM DOORS

TRANSFORMER ROOM DOORS

Are designed for security and durability and manufactured from 1.6 mm mild steel.